What is the purpose of the touchscreen temperature and humidity controller in a high-low temperature alternating humidity test chamber? What are the main functions of the temperature and humidity touchscreen controller?
Temperature and Humidity Control: This is the basic function of the controller. The device uses dynamic PID control, offering extremely high precision. It measures and adjusts temperature and humidity, with humidity control based on water vapor partial pressure.
Multi-Language Interface: To facilitate smooth operation for customers from different countries, the controller is equipped with a language switching interface, such as “Chinese-English switching,” and supports multiple languages.
Scheduling and Large-Capacity Program Presets: The controller allows users to schedule the start time of the high-low temperature alternating humidity test chamber in advance. Additionally, it has a large program capacity, with each program supporting up to 99 segments. Programs can be linked in series, and internal settings allow for full or partial cycles. This enables the creation of complex and diverse test programs to meet different testing requirements.
Data Storage via Computer: The temperature and humidity controller is equipped with interfaces such as RS232, RS485, and USB, allowing it to connect to a computer. Data can be stored and managed through these interfaces in various ways.
Intelligent Safety Protection Functions:
Interruption Management Protection: If the device is interrupted during a test, this function ensures the continuity of the test. The test can resume from the point of interruption without the need for reprogramming; simply restart the power supply.
Specimen Protection: If an air component breaks down, the temperature may rise uncontrollably, potentially damaging the specimen. For high-value specimens, this could result in significant losses. The controller’s protection function automatically cuts off the main power supply when the measured temperature exceeds the set temperature by 5°C, locking the temperature to protect the specimen.
Fault Display via Graphics and Text: If the device experiences issues such as water shortage, overvoltage, or overcurrent, the controller’s display screen will emit an alarm sound and pop up a prompt box, allowing users to address the issue accordingly.
Segmented Sensor Calibration: The controller allows for separate calibration of sensors for high, medium, and low temperature ranges. This makes calibration more convenient and prevents interference between different segments.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Ventilation Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber New energy battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
箱.png)
室.png)
