一本一道精品欧美中文字幕 ,日本欧美亚洲中文,大地资源中文在线观看免费版

Product Features

A split structure can be adopted, with the refrigeration unit and the box placed separately
The top of the box is perforated for easy lifting of the motor
Box bottom has 4 support holes sealed with molded silicone plugs to prevent frost & water overflow
The central axis adopts a special sealing device to avoid frosting at low temperatures

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1300×600
LRHS-1080-RFHY	900×2000×600

temperature range	RT+5℃～60℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Salt spray deposition	1～2ml/80 cm2.h(16-hour average)
heating rate	0.5℃～1.5℃/min
cooling rate	0.5℃～1.0℃/min
Compressed air pressure	2.00±0.01（kg/cm2）
Spraying method	Continuous/periodic selectable
Specimen holder angle	Can meet 15°, 30° tilt test
Test Methods	NSS test AASS test CASS test
Case Material	PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material	PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums	Imported high-grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling	Single or double cascade refrigeration
temperature sensor	PT100 platinum resistance temperature measurement body
Compressor	Taikang, France
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration		V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection		Over-temperature, overall equipment under-phase/reverse-phase, test timing, rapid fogging instructions The end of the test, low water level protection, leakage, short circuit, compressor overpressure overload
Supply Voltage		AC380V±10% 50Hz
Power consumption		8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard salt spray box for automotive parts etc 3、This technical information, subject to change without notice

Solution

New energy vehicles

Automotive vehicle reliability test chamber is widely used in the automotive industry vehicle environment and automotive parts and components enterprises, measurement and testing organizations and scientific research units, etc., the chamber has a high-temperature test, low-temperature test, constant-temperature and constant-humidity test and other comprehensive test conditions, used to measure the performance of the automobile in different temperatures and humidity under the environmental conditions of the performance test, including the cold start, tailpipe emissions, demisting, defrosting test, and so on.

Aerospace

Aerospace vehicles experience extreme temperatures, pressures, vibrations and other environmental conditions during flight. In order to ensure that they can work safely and reliably, material components need to be tested for reliability.

Semiconductor chip

Through the use of LINPIN environmental test equipment, we can comprehensively evaluate the performance of chips under various extreme environmental conditions to ensure that they maintain efficient and stable operation in practical applications. If there is a specific product or test demand, you can choose the appropriate test chamber program according to the actual situation of the customer.

Photovoltaic energy storage

With the rapid development of renewable energy sources, photovoltaic energy storage systems are playing an increasingly important role in the global energy market. These systems need to maintain efficient operation under various extreme environmental conditions. Therefore, environmental testing of PV energy storage systems has become critical. Environmental test chambers provide an ideal platform for simulating various environmental conditions to ensure the performance and durability of PV energy storage systems.

Consumer Electronics

LINPIN can provide the consumer electronics industry, including electronic components, assemblies, and all kinds of finished products, such as: cell phones, tablets, computers, all kinds of wearable devices and other related industry product testing solutions.

Salt spray box for automotive parts